Move each card one at a time to a different PCI slot and restart the computer after each move. Card Problems Fill out the Diagnostics Checklist as you complete these checks. If you have one memory module installed, reinstall it and restart the computer. If any of the diagnostics tests fail, contact Dell. Run the Dell Diagnostics. See ” Floppy drive problems ” for troubleshooting suggestions. Such that green is 10Base-T, orange is Base-T, and yellow is Base-T and all of that is dependent on the Ethernet side of your modem?

Uploader: Akinomi
Date Added: 4 September 2006
File Size: 41.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 32108
Price: Free* [*Free Regsitration Required]

Turn off the computer, wait 30 seconds, and then restart the computer. If the error message appears again, see the software documentation for additional troubleshooting suggestions.

Dell Optiplex Gx270 Modem Drivers

Just explaining that not all have orange. Reinstall all memory modules and restart the computer. Are those colors standard for this system, or am I flirting with a potential problem?

Insert a bootable floppy disk and reboot the computer. Your computer might emit a series of beeps during start-up if the monitor cannot display errors or problems. I will not moodem those at this time. For another operating system, run the appropriate corresponding utility. See the software documentation for minimum memory requirements.


Ensure that the electrical outlet is working by testing it with another device, such as a lamp. See the printer documentation for the correct gxx270 number.

Lan Connection Lights DELL Optiplex GX – General Windows PC Help – Malwarebytes Forums

If the printer is listed, right-click the printer icon. To remove and then reinstall the program: The operating system might have been corrupted.

Discard used batteries according to the manufacturer’s instructions. Reseat all power and data cables and restart the computer.

Card Problems Fill out the Diagnostics Checklist as you complete these checks. Continue until you have identified a faulty connector or reinstalled all modules without error.

I found articles saying the orange color indicated a problem, but my connection works fine. Remove these gx2770 possible causes of interference: An integrated system board device may be faulty.

Try adjusting the settings. It is normal for most device cable connectors to have missing pins.

Enter system setup and correct the computer configuration information. Posted July 31, Click the Modems tab. E-Mail, Modem, and Internet Problems. Continue until you have identified a gx27 module or reinstalled all modules without error.


Sign In Sign Up.

Download drivers for Dell Computer Corporation OptiPlex GX270

For information on power conservation modes, see your operating system documentation. If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. The computer is in a normal operating condition after Modrm. Remove and then reinstall any cards. Under Error-checkingclick Check Now.

Turn on your computer if your computer is already on, restart it. To help you troubleshoot a problem, your computer has four lights labeled “A,” “B,” “C,” and “D” on the back modeem.